Smart Electrical Equipment Cable Distribution Box for Optimal Performance

• Customization: Available
• Certification: ISO9001
• Shell Material: Steel Plate
• Model NO.: NCDFV01
• Voltage Level: Low Voltage
• Installation: Fixed
• Structure: Cabinet
• Current: AC
• Output Frequency: 50Hz
• Operating Voltage: 380V
• Operating Current: 5000A
• Use Environment: -5ºC-40ºC
• Warranty: 24 Months
• Transport Package: Standard Export Wooden Box with Pallet
• Specification: 1000mm*600mm*2200mm
• Trademark: Newcom
• Origin: Fujian, China
• HS Code: 8504409999
• Production Capacity: 2000pieces/Month

Product Description

Product Description

Use Environment

1. The ambient air temperature is maintained within optimal bounds, not exceeding +40°C or dropping below -5°C, ensuring the average temperature does not surpass +35°C within any 24-hour period;

2. Relative humidity is carefully regulated, not exceeding 50% at the peak temperature of +40°C, with allowance for higher humidity at lower temperatures, such as reaching 90% when the temperature is +20°C;

3. The environment must be pristine, free from corrosive and explosive gases, and devoid of conductive or insulating dust particles;

4. Ensure stability by installing vertically without significant shaking or vibration, maintaining an inclination of no more than 5 degrees;

5. Located at an altitude not exceeding 2000 meters;

6. The switch cabinet is capable of withstanding transportation and storage temperatures ranging from -25°C to +55°C, with short-term endurance (not exceeding 24 hours) of up to +70°C;

7. For conditions outside these parameters, consultation with the manufacturer is required for tailored solutions.

About Us

Ordering Instructions

When placing an order, the User is requested to provide the following comprehensive details:

1. A detailed main circuit distribution system diagram, including phase layout. Specify rated working voltage, rated working current, protection device operating current, and all necessary technical specifications.

2. Clearly indicate the specifications for both incoming and outgoing cables.

3. Detailed model, specification, and quantity of principal electrical components within the differential cabinet must be provided.

4. If inter-switch cabinet bus extrusion or bus duct is required, specify all precise data such as span and height from the ground.

5. Note any special environmental conditions under which the switch cabinet will operate, to ensure tailored production.

6. Specify the surface color of the switch cabinet along with any other distinct requirements.