Universal Smart Breakers for Enhanced Protection in Electrical Systems

• Customization: Available
• Certification: ISO9001
• Shell Material: Steel Plate
• Model NO.: NCNFW01
• Voltage Level: Low Voltage
• Installation: Fixed
• Structure: Cabinet
• Current: AC
• Output Frequency: 50Hz
• Operating Voltage: 380V
• Operating Current: 5000A
• Use Environment: -5ºC-40ºC
• Warranty: 24 Months
• Transport Package: Standard Export Wooden Box with Pallet
• Specification: 1000mm*600mm*2200mm
• Trademark: Newcom
• Origin: Fujian, China
• HS Code: 8504409999
• Production Capacity: 2000pieces/Month

Product Description

Product Description

Use Environment

1. The ambient air temperature should not exceed +40 °C, and should remain above -5 °C. Ensure the average temperature is kept below +35 °C over a 24-hour period.

2. Maintain a relative humidity of no more than 50% when the temperature is at +40 °C. Higher relative humidity, such as 90% at +20 °C, is acceptable at lower temperatures.

3. Air should be clean and free from corrosive and explosive gases, as well as conductive and insulating dust.

4. Ensure a stable environment without significant shaking or vibration. Install vertically with an inclination not exceeding 5 degrees.

5. The operational altitude should not surpass 2000 meters.

6. The switch cabinet is suitable for transportation and storage at temperatures between -25 °C and +55 °C, with short-term tolerances up to +70 °C (not exceeding 24 hours).

7. If the specified conditions cannot be met, please consult with the manufacturer to discuss alternative arrangements.

About Us

Ordering Instructions

When placing an order, the User shall provide:

1. A detailed main circuit distribution system diagram with phase layout, including rated working voltage, current, protection device settings, and all necessary technical parameters.

2. Specify the specifications for all incoming and outgoing cables.

3. Provide the model, specification, and quantity of the main electrical components within the differential cabinet.

4. If bus extrusion or bus duct is needed between switch or incoming cabinets, specify the required data such as span and height from the ground.

5. Clearly outline any special environmental conditions under which the switch cabinet will be used at the time of ordering.

6. Specify the desired surface color of the switch cabinet and any additional specific requirements you may have.