Heavy-Duty Switchgear Distribution Box for 50Hz Operating Frequency

• Customization: Available
• Certification: ISO9001
• Shell Material: Steel Plate
• Model NO.: NCDFV01
• Voltage Level: Low Voltage
• Installation: Fixed
• Structure: Cabinet
• Current: AC
• Output Frequency: 50Hz
• Operating Voltage: 380V
• Operating Current: 5000A
• Use Environment: -5ºC-40ºC
• Warranty: 24 Months
• Transport Package: Standard Export Wooden Box with Pallet
• Specification: 1000mm*600mm*2200mm
• Trademark: Newcom
• Origin: Fujian, China
• HS Code: 8504409999
• Production Capacity: 2000pieces/Month

Product Description

Product Description

Use Environment

1. The optimal ambient air temperature range for the Heavy-Duty Switchgear Distribution Box is between -5 °C and +40 °C, ensuring consistent performance. Over a 24-hour period, the average temperature should not exceed +35 °C.

2. This product is designed to operate efficiently with a relative humidity of no more than 50% at +40 °C. When the temperature decreases, such as at +20 °C, higher relative humidity levels are permissible, up to 90%.

3. It is essential that the installation environment is free of corrosive or explosive gases, and devoid of conductive and insulating dust, providing a clean air setting.

4. The switchgear must be installed vertically in stable conditions, free from significant shaking or vibrations, with an installation tilt not exceeding 5 degrees.

5. The altitude for operating the switchgear should not surpass 2000 meters, ensuring optimal performance.

6. This switch cabinet is engineered to withstand transportation and storage temperatures ranging from -25 °C to +55 °C, with short-term exposure (up to 24 hours) allowed up to +70 °C.

7. Should these conditions not be met, users are encouraged to engage in discussions with the manufacturer to tailor suitable solutions.

About Us

Ordering Instructions

When placing an order for the state-of-the-art Heavy-Duty Switchgear Distribution Box, please ensure you provide the following critical information:

1. A detailed diagram of the main circuit distribution system, including phase layout, rated working voltage, current specifications, protection devices, and all necessary technical parameters.

2. Clearly specify the specifications of both incoming and outgoing cables.

3. Include the model, specifications, and quantity of the primary electrical components within the differential cabinet.

4. If bus extrusion or bus duct connections between switch cabinets or incoming cabinets are required, provide precise data on span and height from the ground.

5. For operation under special environmental conditions, detailed specifications should be provided at the time of order.

6. Specify the desired surface color of the switch cabinet and any other specific requirements you may have.