Compact Lighting Box with Circuit Breaker for Effective Power Distribution

• Customization: Available
• Certification: ISO9001
• Shell Material: Steel Plate
• Model NO.: NCJXF01
• Voltage Level: High Voltage
• Installation: Fixed
• Structure: Cabinet
• Current: AC
• Output Frequency: 50Hz
• Operating Voltage: 380V
• Operating Current: 5000A
• Use Environment: -5ºC-40ºC
• Warranty: 24 Months
• Transport Package: Standard Export Wooden Box with Pallet
• Specification: 1000mm*600mm*2200mm
• Trademark: Newcom
• Origin: Fujian, China
• HS Code: 8504409999
• Production Capacity: 2000pieces/Month

Product Description

Product Description

Use Environment

1. The ambient air temperature should remain comfortable, not exceeding +40 °C or dropping below -5 °C, with an average not surpassing +35 °C over a 24-hour period; ensuring optimal performance.

2. Maintain a serene atmosphere with the relative humidity not exceeding 50% at maximum +40 °C, while accommodating higher humidity at cooler temperatures, reaching 90% at +20 °C;

3. Ensure a pristine environment with clean air, free from corrosive and explosive gases, and devoid of conductive and insulating dust;

4. Install vertically in a stable manner, avoiding areas with significant shaking or vibration. Ensure the inclination does not exceed 5 degrees;

5. Ensure the location is at an altitude not exceeding 2000 meters, optimizing the product's functionality;

6. For transportation and storage, the switch cabinet can withstand temperatures between -25 °C and +55 °C, and tolerate up to +70 °C briefly (no more than 24 hours);

7. In scenarios where these ideal conditions cannot be maintained, please engage in a dialogue with the manufacturer to explore feasible solutions.

About Us

Ordering Instructions

To ensure a seamless ordering experience, please provide the following details:

1. A detailed diagram of the main circuit distribution system, including phase layout, rated working voltage, current, and protection device current, alongside essential technical parameters.

2. Specify the specifications for both incoming and outgoing cables.

3. Clearly list the model, specifications, and quantity of the main electrical components required in the differential cabinet.

4. If a bus extrusion or bus duct is needed between switch cabinets or incoming cabinets, specify the necessary data, including span and height from the ground.

5. If the switch cabinet will operate in special environmental conditions, detail these when placing your order.

6. Indicate the surface color of the switch cabinet and any other specific requirements to tailor the product to your needs.