Innovative Lighting Box with Insulation for Safe Electrical Distribution

• Customization: Available
• Certification: ISO9001
• Shell Material: Steel Plate
• Model NO.: NCJXF01
• Voltage Level: High Voltage
• Installation: Fixed
• Structure: Cabinet
• Current: AC
• Output Frequency: 50Hz
• Operating Voltage: 380V
• Operating Current: 5000A
• Use Environment: -5ºC-40ºC
• Warranty: 24 Months
• Transport Package: Standard Export Wooden Box with Pallet
• Specification: 1000mm*600mm*2200mm
• Trademark: Newcom
• Origin: Fujian, China
• HS Code: 8504409999
• Production Capacity: 2000pieces/Month

Product Description

Product Description

Use Environment

1. Ensuring optimal functionality, the ambient air temperature should not exceed the limits of +40 °C nor fall below -5 °C, with an average daily temperature not surpassing +35 °C.

2. The relative humidity must remain at or below 50% when the temperature reaches its peak at +40 °C. However, higher humidity levels are permissible at cooler temperatures, exemplified by 90% at +20 °C.

3. The environment must consist of clean, pristine air, free from corrosive, explosive gases, and devoid of conductive or insulating dust.

4. For optimal stability, the installation should be vertical with minimal shaking or vibration, maintaining an inclination of no more than 5 degrees.

5. The product is designed to function flawlessly at altitudes up to 2000 meters.

6. During transportation and storage, it is crucial to maintain temperatures between -25 °C and +55 °C, with short-term tolerance up to +70 °C (not exceeding 24 hours).

7. Should these conditions not be fully achievable, it is imperative for users to discuss potential alternatives with the manufacturer.

About Us

Ordering Instructions

When placing an order, please ensure to provide the following information:

1. Detailed diagrams of the main circuit distribution system and phase layouts, including rated working voltage, rated current, protective device current, and all necessary technical parameters.

2. Please specify the specifications of both the incoming and outgoing cables.

3. Include the model, specification, and quantity of all primary electrical components within the differential cabinet.

4. If a bus extrusion or bus duct is needed between cabinets, indicate specific data such as the span and elevation from the ground.

5. For applications requiring the switch cabinet in special environmental conditions, these must be explicitly detailed upon ordering.

6. Specify the desired surface color of the switch cabinet along with any other particular requirements.