Durable Electrical Switchgear for Enhanced Performance in Power Distribution

• Customization: Available
• Certification: ISO9001
• Shell Material: Steel Plate
• Model NO.: NCGGD01
• Voltage Level: Low Voltage
• Installation: Fixed
• Structure: Cabinet
• Current: AC
• Output Frequency: 50Hz
• Operating Voltage: 380V
• Operating Current: 5000A
• Use Environment: -5ºC-40ºC
• Warranty: 24 Months
• Transport Package: Standard Export Wooden Box with Pallet
• Specification: 1000mm*600mm*2200mm
• Trademark: Newcom
• Origin: Fujian, China
• HS Code: 8504409999
• Production Capacity: 2000pieces/Month

Product Description

Product Description

Use Environment

1. The ambient air temperature must remain within a moderate range, not exceeding a peak of +40°C and not dropping below -5°C. Additionally, it's crucial that the average temperature over any span of 24 hours does not surpass +35°C to ensure optimal performance.

2. Designed for indoor installation, this product should be used in locations where the altitude does not exceed 2000 meters to maintain its high efficiency and reliability.

3. The surrounding air should maintain a relative humidity that does not exceed 50% at the peak temperature of +40°C. However, at lower temperatures, higher humidity levels are permissible, such as up to 90% at +20°C. This specification takes into account potential condensation caused by temperature fluctuations.

4. When installed, the equipment should not deviate more than 5% from the vertical plane, ensuring stability and operational efficiency.

5. The equipment must be sited in a location free from intense vibration or impact, and where the electrical components are safe from corrosive elements, safeguarding its longevity and performance.

6. Should there be any special requirements, please engage in discussions with the manufacturer to address and resolve these concerns to your satisfaction.

Customizable products

About Us

Ordering Instructions

When placing an order, the User shall provide:

1. A detailed main circuit distribution system diagram including phase layout, along with the rated working voltage, current, protection device specifics, and all essential technical parameters to ensure seamless integration.

2. Clearly state the specifications of both incoming and outgoing cables to avoid any disruptions in the connectivity and functionality.

3. Specify the model, specifications, and quantities of the primary electrical components intended for the differential cabinet to ensure precise configuration.

4. Should there be a need for bus extrusion or bus duct connections between the switch or incoming cabinets, kindly provide detailed data on the required span and ground height for accurate setup.

5. If the switch cabinet is intended for use under specific environmental conditions, these should be thoroughly detailed during the ordering process to tailor the solution accordingly.

6. Specify the desired surface color of the switch cabinet as well as any other specific requirements to ensure the product meets your precise standards and aesthetic preferences.