Compact Low Voltage Switchgear Distribution Box for 50Hz Frequency

• Customization: Available
• Certification: ISO9001
• Shell Material: Steel Plate
• Model NO.: NCDFV01
• Voltage Level: Low Voltage
• Installation: Fixed
• Structure: Cabinet
• Current: AC
• Output Frequency: 50Hz
• Operating Voltage: 380V
• Operating Current: 5000A
• Use Environment: -5ºC-40ºC
• Warranty: 24 Months
• Transport Package: Standard Export Wooden Box with Pallet
• Specification: 1000mm*600mm*2200mm
• Trademark: Newcom
• Origin: Fujian, China
• HS Code: 8504409999
• Production Capacity: 2000pieces/Month

Product Description

Product Description

Use Environment

1. The ambient air temperature should remain below a maximum of +40 °C and not drop beneath a minimum of -5 °C, with a daily average not exceeding +35 °C over a 24-hour period.

2. Relative humidity must not exceed 50% at the peak temperature of +40 °C. However, higher relative humidity is permissible at lower temperatures, such as up to 90% at +20 °C.

3. The environment should consist of clean air, free from corrosive, explosive gases, and devoid of conductive or insulating dust.

4. This equipment is designed for vertical installation in environments with minimal shaking or shock vibrations. The installation inclination must not exceed 5 degrees.

5. The installation site should be at an altitude not surpassing 2000 meters above sea level.

6. The switchgear is capable of enduring transportation and storage temperatures ranging from -25 °C up to +55 °C, with short-term exposure (up to 24 hours) permitted at temperatures up to +70 °C.

7. For any conditions deviating from the aforementioned, users should engage in negotiations with the manufacturer for tailored solutions.

About Us

Ordering Instructions

When placing an order, the client must ensure to provide:

1. A detailed main circuit distribution system diagram, including phase layout. Specifications should encompass rated operational voltage, current, and protection device operating parameters, alongside necessary technical details.

2. Clearly specify the specifications of both incoming and outgoing cables.

3. Provide the model, specification, and quantity of primary electrical components within the differential cabinet.

4. If there's a requirement for bus extrusion or bus ducts between switch cabinets or incoming cabinets, it's crucial to specify necessary data such as span and elevation from the ground.

5. Should the switch cabinet be deployed under special environmental conditions, it is imperative to detail these conditions when placing the order.

6. Indicate the desired surface color of the switch cabinet and any additional specific requirements.