Advanced Circuit Breaker Distribution Box for 380V Low Voltage Systems

• Customization: Available
• Certification: ISO9001
• Shell Material: Steel Plate
• Model NO.: NCDFV01
• Voltage Level: Low Voltage
• Installation: Fixed
• Structure: Cabinet
• Current: AC
• Output Frequency: 50Hz
• Operating Voltage: 380V
• Operating Current: 5000A
• Use Environment: -5ºC-40ºC
• Warranty: 24 Months
• Transport Package: Standard Export Wooden Box with Pallet
• Specification: 1000mm*600mm*2200mm
• Trademark: Newcom
• Origin: Fujian, China
• HS Code: 8504409999
• Production Capacity: 2000pieces/Month

Product Description

Product Description

Use Environment

1. The ambient air temperature should remain below +40 °C without dropping below -5 °C. Over a 24-hour period, the average temperature must not exceed +35 °C, ensuring optimal product performance.

2. At the maximum temperature of +40 °C, the relative humidity should not surpass 50%. However, in cooler conditions, such as +20 °C, the relative humidity can reach up to 90%, maintaining environmental balance.

3. The air must be clean and clear, free from any corrosive or explosive gases, and devoid of conductive or insulating dust, to ensure safe and efficient operation.

4. Install the product vertically in environments free from significant shaking or shock vibration. Ensure the installation remains within an inclination of no more than 5 degrees for optimal stability.

5. The installation site should be at an altitude not exceeding 2000 meters, allowing the product to function efficiently within design specifications.

6. For transportation and storage, the switch cabinet should be kept in temperatures ranging from -25 °C to +55 °C, with short-term exposure (up to 24 hours) permitted at temperatures not exceeding +70 °C.

7. If the specified conditions cannot be met, it is essential for users to discuss and negotiate with the manufacturer to ensure compatibility and safety.

About Us

Ordering Instructions

When placing an order, please provide the following details:

1. A diagram of the main circuit distribution system, including the phase layout. Detail the rated working voltage, current, protection device current, and any necessary technical parameters for seamless integration.

2. Specify the specifications of both incoming and outgoing cables to ensure compatibility with the system.

3. Provide the model, specification, and quantity of the main electrical components required within the differential cabinet for precise configuration.

4. If bus extrusion or a bus duct is needed between switch cabinets or incoming cabinets, please indicate the specific data such as span and height from the ground for accurate installation.

5. For switch cabinets used under special environmental conditions, please detail these conditions during the ordering process to ensure the product is tailored to your needs.

6. Specify the desired surface color of the switch cabinet along with any other specific requirements to match your aesthetic and functional preferences.