Insulated Circuit Breaker Cable Distribution Box with 5000A Current Support

• Customization: Available
• Certification: ISO9001
• Shell Material: Steel Plate
• Model NO.: NCDFV01
• Voltage Level: Low Voltage
• Installation: Fixed
• Structure: Cabinet
• Current: AC
• Output Frequency: 50Hz
• Operating Voltage: 380V
• Operating Current: 5000A
• Use Environment: -5ºC-40ºC
• Warranty: 24 Months
• Transport Package: Standard Export Wooden Box with Pallet
• Specification: 1000mm*600mm*2200mm
• Trademark: Newcom
• Origin: Fujian, China
• HS Code: 8504409999
• Production Capacity: 2000pieces/Month

Product Description

Product Description

Use Environment

1. The ambient air temperature should remain within the optimal range, not exceeding +40 °C and not dropping below -5 °C. Over a 24-hour period, ensure the average temperature stays within +35 °C.

2. Maintain a relative temperature of no more than 50% at the peak temperature of +40 °C. It is acceptable to have a higher relative temperature at cooler conditions, reaching up to 90% when at +20 °C.

3. The operational space must be free of pollutants—ensure the area is filled with clean air, devoid of corrosive and explosive gases, and free from both conductive and insulating dust.

4. For optimal performance, install vertically in environments with minimal vibrations and no significant shaking. The installation angle should not exceed 5 degrees.

5. Ensure that the installation site is not situated at an altitude surpassing 2000 meters, to maintain operational efficiency.

6. The switch cabinet is engineered for storage and transport within the temperature range of -25 °C to +55 °C. It can withstand up to +70 °C for brief periods not exceeding 24 hours.

7. Should the stated conditions be unachievable, it is important to engage in negotiations with the manufacturer to find suitable solutions.

About Us

Ordering Instructions

When placing an order, the User shall provide:

1. A comprehensive main circuit distribution system diagram, including phase layout details. Specify rated working voltage, current, and the protection device's operational current, along with other necessary technical parameters.

2. Clearly state the specifications for both incoming and outgoing cables, ensuring they meet your specific requirements.

3. Specify the model, specification, and quantity of the primary electrical components within the differential cabinet for precision.

4. Should bus extrusion or ducting between switch cabinets or incoming cabinets be needed, provide precise data regarding span and ground height for accuracy.

5. For switch cabinets intended for use in unique environmental conditions, include detailed specifications when placing your order.

6. Specify the preferred surface color of the switch cabinet, along with any additional requirements you may have.