Reliable Intelligent Breakers for Home and Industrial Power Needs

• Customization: Available
• Certification: ISO9001
• Shell Material: Steel Plate
• Model NO.: NCNFW01
• Voltage Level: Low Voltage
• Installation: Fixed
• Structure: Cabinet
• Current: AC
• Output Frequency: 50Hz
• Operating Voltage: 380V
• Operating Current: 5000A
• Use Environment: -5ºC-40ºC
• Warranty: 24 Months
• Transport Package: Standard Export Wooden Box with Pallet
• Specification: 1000mm*600mm*2200mm
• Trademark: Newcom
• Origin: Fujian, China
• HS Code: 8504409999
• Production Capacity: 2000pieces/Month

Product Description

Product Description

Use Environment

1. The ambient air temperature must remain comfortably between +40 °C and -5 °C, ensuring that the average temperature does not exceed +35 °C over a 24-hour period.

2. Maintain a relative humidity of no more than 50% at +40 °C. At lower temperatures, a higher humidity level is permissible, such as 90% at +20 °C.

3. Ensure access to clean air that is free from corrosive, explosive gases, and devoid of conductive or insulating dust.

4. Install vertically with minimal shaking or vibrations, ensuring the inclination is no greater than 5 degrees for optimal performance.

5. Operate at altitudes not exceeding 2000 meters to maintain functionality and efficiency.

6. Designed for safe transport and storage between temperatures of -25 °C to +55 °C, with short-term tolerance up to +70 °C (less than 24 hours).

7. Should the above conditions be unattainable, users are encouraged to discuss adjustments with the manufacturer.

About Us

Ordering Instructions

When placing an order, users should provide the following details:

1. The main circuit distribution system and phase layout diagram, along with specifications for rated working voltage, current, protection device current, and any other essential technical parameters.

2. Clearly indicate the specifications of both incoming and outgoing cables to ensure proper compatibility.

3. Detail the model, specification, and quantity of key electrical components within the differential cabinet.

4. If required, specify the data for bus extrusion or bus duct between switch or incoming cabinets, including necessary span and ground height.

5. For usage under special environmental conditions, all details should be specified at the time of ordering.

6. Specify the desired surface color of the switch cabinet and any other particular requirements to customize your order.