Versatile Distribution Box with Isolator for Secure Electrical Operations

• Customization: Available
• Certification: ISO9001
• Shell Material: Steel Plate
• Model NO.: NCJXF01
• Voltage Level: High Voltage
• Installation: Fixed
• Structure: Cabinet
• Current: AC
• Output Frequency: 50Hz
• Operating Voltage: 380V
• Operating Current: 5000A
• Use Environment: -5ºC-40ºC
• Warranty: 24 Months
• Transport Package: Standard Export Wooden Box with Pallet
• Specification: 1000mm*600mm*2200mm
• Trademark: Newcom
• Origin: Fujian, China
• HS Code: 8504409999
• Production Capacity: 2000pieces/Month

Product Description

Product Description

Use Environment

1. The ambient air temperature should ideally not exceed +40 °C and not drop below -5 °C. Additionally, the average temperature over a 24-hour period should remain under +35 °C;

2. Relative humidity should not surpass 50% when the temperature peaks at +40 °C. However, higher humidity levels, such as 90% at +20 °C, are acceptable during cooler conditions;

3. The environment must be clean and free from corrosive and explosive gases, with no presence of conductive or insulating dust;

4. Ensure the setup is free from noticeable shaking or shock vibrations. The installation must be vertical, with the inclination angle kept under 5 degrees;

5. The installation site should be at an altitude not exceeding 2000 meters;

6. For transportation and storage, maintain the switch cabinet within a temperature range of -25 °C to +55 °C, allowing brief exposure to temperatures up to +70 °C, but not exceeding 24 hours;

7. Should these conditions be unachievable, users are encouraged to engage in discussions with the manufacturer for tailored solutions.

About Us

Ordering Instructions

When placing an order, the User shall provide:

1. A detailed diagram of the main circuit distribution system, including phase layout. Specify rated working voltage, rated working current, protection device current, and all essential technical parameters.

2. Clearly indicate the specifications for both incoming and outgoing cables.

3. Provide model, specification, and quantity of main electrical components within the differential cabinet.

4. If there is a need for bus extrusion or bus duct between switch cabinets or incoming cabinets, specify the required data, including span and height from the ground.

5. For use under special environmental conditions, detailed requirements must be specified at the time of ordering.

6. Specify the surface color of the switch cabinet along with any other specific requirements.