Heavy-Duty Switchgear Cable Distribution Box with 50Hz Output Frequency

• Customization: Available
• Certification: ISO9001
• Shell Material: Steel Plate
• Model NO.: NCDFV01
• Voltage Level: Low Voltage
• Installation: Fixed
• Structure: Cabinet
• Current: AC
• Output Frequency: 50Hz
• Operating Voltage: 380V
• Operating Current: 5000A
• Use Environment: -5ºC-40ºC
• Warranty: 24 Months
• Transport Package: Standard Export Wooden Box with Pallet
• Specification: 1000mm*600mm*2200mm
• Trademark: Newcom
• Origin: Fujian, China
• HS Code: 8504409999
• Production Capacity: 2000pieces/Month

Product Description

Product Description

Use Environment

1. The operating environment should maintain an ambient air temperature range that does not exceed +40 °C, and should not drop below -5 °C, ensuring an average temperature within 24 hours remains under +35 °C;

2. Maintain a relative humidity not surpassing 50% at the maximum temperature of +40 °C, while permitting a higher humidity at reduced temperatures, such as 90% at +20 °C, for optimal performance;

3. Ensure a clean air environment devoid of corrosive or explosive gases, and free from conductive and insulating dust to maintain safety and functionality;

4. The installation should be vertical with minimal shaking or shock vibration, and any inclination should not exceed 5 degrees for stability;

5. Ensure the installation site is at an altitude of no more than 2000 meters to guarantee uninterrupted performance;

6. For transportation and storage of the switch cabinet, maintain a temperature range of -25 °C to +55 °C, with a temporary allowance of up to +70 °C for a period not exceeding 24 hours;

7. If the above conditions cannot be fulfilled, users are encouraged to negotiate directly with the manufacturer to seek a customized solution.

About Us

Ordering Instructions

When placing an order, the User shall provide the following crucial details:

1. A detailed main circuit distribution system diagram, including phase layout, rated working voltage, current specifications, protection device parameters, and other necessary technical specifications;

2. Clear specifications of the incoming and outgoing cables required for the project;

3. The model, specification, and quantity of the main electrical components to be incorporated within the differential cabinet should be specified;

4. If bus extrusion or bus duct connections are needed between switch cabinets or incoming cabinets, provide precise details such as span and height from the ground;

5. Specify any special environmental conditions under which the switch cabinet will be used, detailing these when placing the order;

6. Specify the surface color of the switch cabinet and any other unique requirements according to your project needs.