Smart Electrical Switchgear with Insulation and Protective Device Features

• Customization: Available
• Certification: ISO9001
• Shell Material: Steel Plate
• Model NO.: NCGGD01
• Voltage Level: Low Voltage
• Installation: Fixed
• Structure: Cabinet
• Current: AC
• Output Frequency: 50Hz
• Operating Voltage: 380V
• Operating Current: 5000A
• Use Environment: -5ºC-40ºC
• Warranty: 24 Months
• Transport Package: Standard Export Wooden Box with Pallet
• Specification: 1000mm*600mm*2200mm
• Trademark: Newcom
• Origin: Fujian, China
• HS Code: 8504409999
• Production Capacity: 2000pieces/Month

Product Description

Product Description

Use Environment

1. The ambient air temperature for this state-of-the-art Smart Electrical Switchgear ranges between a maximum of +40°C and a minimum of -5°C. Additionally, the average temperature over a 24-hour period must not exceed a comfortable +35°C, ensuring optimal performance.

2. Designed for indoor installation, the optimal functioning of this switchgear requires the altitude of its location not to surpass 2000 meters above sea level.

3. The surrounding air's relative humidity should be kept at or below 50% when the temperature peaks at +40°C. However, more significant humidity levels, such as 90% at +20°C, are permissible at lower temperatures to accommodate the effects of occasional condensation due to fluctuating temperatures.

4. For ideal installation, the equipment must maintain an inclination of no more than 5% relative to a vertical plane, ensuring stability and efficiency.

5. It is crucial to install the equipment in an environment free from severe vibrations and impacts, and where the electrical components remain uninfluenced by corrosive elements.

6. Should there be any special requirements, users are encouraged to consult and negotiate with the manufacturer to address and resolve their specific needs.

Customizable products

About Us

Ordering Instructions

When placing an order, the User shall provide:

1. A detailed main circuit distribution system diagram including the phase layout diagram, rated working voltage, rated working current, protection device current, and any other essential technical parameters for the Smart Electrical Switchgear.

2. Precise specifications for both incoming and outgoing cables must be indicated.

3. The model, specification, and the quantity of the primary electrical components within the differential cabinet must be clearly stated.

4. Should there be a necessity for a bus extrusion or a bus duct between the switch cabinets or incoming cabinets, specific data such as span and height relative to the ground must be provided.

5. Detailed descriptions are required if the switch cabinet is to be utilized under special environmental conditions.

6. The desired surface color of the switch cabinet along with any specific additional requirements should be specified.