Product Description
MNS type low-voltage withdrawable switchgear (hereinafter referred to as switchgear) is developed by our company after referring to the MNS series low-voltage switchgear of ABB company in Switzerland and comprehensive improvement, and is currently the most advanced low-voltage withdrawable switchgear in China. The products are all made up of standardized, series of modules, and the drawers have reliable mechanical interlocks, making them safer and more reliable for users to use.
This switch cabinet is suitable for AC 50 (60) Hz, rated working voltage 400V, 660V, rated current 5000A and below three-phase five-wire power system, can be used in power plants, substations, industrial and mining enterprises, buildings, hotels, airports, docks and radio and television and other communication centers, as power generation, transmission and distribution, power conversion and power consumption equipment control, and through the capacitance compensation cabinet to the founder bus reactive power compensation. Comply with the national standard: GB7251.1 "low-voltage switchgear" IEC60439 "low-voltage switchgear and control equipment"
Use Environment
1. The ambient air temperature is not higher than +40 °C, not lower than -5 °C, and its average temperature is not higher than +35 °C for 24 hours.
2. The relative humidity of the surrounding air does not exceed 50% at the maximum temperature of +40°C, and there is a higher relative humidity at lower temperatures, such as 90% at +20°C, but considering that moderate condensation may occasionally occur due to temperature changes.
3. For indoor use, the height of the poster at the place of use shall not exceed 2000m.
4. It should be installed in a place where there is no violent vibration and impact, and where electrical components are not corroded.
Customizable products
About Us
Ordering Instructions
When placing an order, the User shall provide:
1. Main circuit distribution system diagram phase layout diagram. Rated working voltage, rated working current, protection device walking current and necessary technical parameters.
2. Indicate the specifications of incoming and outgoing cables.
3. The model, specification and quantity of the main electrical components in the differential cabinet.
4. If the bus extrusion or bus duct is required between the switch cabinets or the incoming cabinets, the specific required data such as span and height from the ground shall be indicated.
5. When the switch cabinet is used under special environmental conditions, it should be detailed when ordering.
6. Surface color of the switch cabinet and other specific requirements.
Audited Supplier 
){kind=link}