Jxf Reliable Lighting Box for High-Performance Electrical Management Solutions

• Customization: Available
• Certification: ISO9001
• Shell Material: Steel Plate
• Model NO.: NCJXF01
• Voltage Level: High Voltage
• Installation: Fixed
• Structure: Cabinet
• Current: AC
• Output Frequency: 50Hz
• Operating Voltage: 380V
• Operating Current: 5000A
• Use Environment: -5ºC-40ºC
• Warranty: 24 Months
• Transport Package: Standard Export Wooden Box with Pallet
• Specification: 1000mm*600mm*2200mm
• Trademark: Newcom
• Origin: Fujian, China
• HS Code: 8504409999
• Production Capacity: 2000pieces/Month

Product Description

Product Description

Use Environment

1. Designed for optimal performance, the ambient air temperature should not exceed +40 °C or drop below -5 °C, with a 24-hour average not surpassing +35 °C for reliable functionality.

2. Ideal humidity conditions: 50% at +40 °C, accommodating higher relative humidity at lower temperatures, such as 90% at +20 °C, ensuring adaptability.

3. For pristine operation, ensure the air is clean and free from corrosive substances, explosive gases, as well as conductive and insulating dust.

4. Installed vertically to withstand minimal shaking and vibration, maintaining an inclination of less than 5 degrees for stability.

5. The altitude for installation should not exceed 2000 meters, ensuring seamless operation at higher elevations.

6. For maintenance efficiency during transport and storage, the temperature range should be between -25 °C and +55 °C, with temporary allowances up to +70 °C not exceeding 24 hours.

7. If these conditions are not feasible, a collaborative discussion between the user and manufacturer is recommended to tailor solutions.

About Us

Ordering Instructions

When placing an order, the User shall provide:

1. A detailed main circuit distribution system diagram, including phase layout, rated working voltage, current, protection devices, and other essential technical parameters.

2. Clear specifications for both incoming and outgoing cables to ensure compatibility and performance.

3. The precise model, specifications, and quantity of the primary electrical components within the differential cabinet.

4. If bus extrusion or bus duct is needed between switch cabinets or incoming cabinets, specify data like span and height from the ground.

5. Any special environmental conditions under which the switch cabinet will be used should be clearly detailed at the order stage.

6. Indicate the desired surface color of the switch cabinet along with any other specific customization requirements.