Versatile Distribution Box with Advanced Insulation for Electrical Safety

• Customization: Available
• Certification: ISO9001
• Shell Material: Steel Plate
• Model NO.: NCJXF01
• Voltage Level: High Voltage
• Installation: Fixed
• Structure: Cabinet
• Current: AC
• Output Frequency: 50Hz
• Operating Voltage: 380V
• Operating Current: 5000A
• Use Environment: -5ºC-40ºC
• Warranty: 24 Months
• Transport Package: Standard Export Wooden Box with Pallet
• Specification: 1000mm*600mm*2200mm
• Trademark: Newcom
• Origin: Fujian, China
• HS Code: 8504409999
• Production Capacity: 2000pieces/Month

Product Description

Product Description

Use Environment

1. The ideal ambient temperature should remain below +40 °C and not dip under -5 °C, while the 24-hour average temperature must not exceed +35 °C. This ensures optimal functioning of the distribution box.

2. Relative humidity must not surpass 50% at the peak temperature of +40 °C. However, this versatile distribution box can handle higher humidity levels at lower temperatures, allowing up to 90% at +20 °C.

3. The air should be free from corrosive, explosive gases, and devoid of conductive or insulating dust, ensuring a clean and safe operational environment.

4. Designed for stable environments, the box should be installed vertically with minimal shaking and vibration, and the tilt angle should not exceed 5 degrees.

5. Suitable for locations where the altitude does not surpass 2000 meters, maintaining optimal functionality at various elevations.

6. For transportation and storage, maintain temperatures between -25 °C and +55 °C, with short periods not exceeding +70 °C (limited to 24 hours), ensuring product integrity.

7. If the specified conditions cannot be met, it is recommended to negotiate with the manufacturer to explore tailored solutions.

About Us

Ordering Instructions

When placing an order, please ensure the following information is provided:

1. Detailed diagrams of the main circuit distribution system, including phase layout. Specify rated voltage, current, protection requirements, and any vital technical parameters.

2. Clearly indicate the specifications for both incoming and outgoing cables to ensure seamless integration.

3. Specify the model, specifications, and quantity of essential electrical components within the differential cabinet for precise customization.

4. If there is a need for bus extrusion or ducts between switch cabinets or incoming cabinets, please provide specific data on span and elevation from the ground.

5. Specify any special environmental conditions under which the switch cabinet will operate for accurate customization during ordering.

6. Indicate the desired surface color of the switch cabinet along with any additional specific requirements to ensure your complete satisfaction.